Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006COBALT SS, 4D SEDAN, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 162 (STEERING WHEEL & STEERING COLUMN)COMPONENT LOCATORSTEERING COLUMN DISASSEMBLED VIEW
2006 Chevrolet Cobalt SS, 4D Sedan, Standard
Steering Column Disassembled View
2006 Chevrolet Cobalt SS, 4D Sedan, StandardSECTION Steering Column Disassembled View
WARNING: This page is about a different car, the 2005 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| 1 | Upper Intermediate Shaft Bolt |
| 2 | Lower Intermediate Shaft Bolt |
| 3 | Intermediate Shaft Assembly |
| 4 | Lower Steering Column Support Bracket Bolt |
| 5 | Lower Steering Column Jacket Bolt |
| 6 | Steering Column Assembly |
| 7 | Wiper/Washer Switch Assembly |
| 8 | Ignition Start Switch Screw |
| 9 | Ignition Start Switch Assembly |
| 10 | Ignition Start Switch Housing Assembly |
| 11 | Upper Steering Column Support Bracket Bolt |
| 12 | Steering Column Jacket Assembly |
| 13 | Headlamp/Dimmer/Park/Turn Signal Switch Assembly |
| 14 | Ignition Start Switch Bracket Bolt |
| 15 | Wiper/Washer Switch and Headlamp/Dimmer/Park/Turn Signal Switch Bracket |
| 16 | Steering Column Shroud Assembly |
| 17 | Lower Steering Column Shroud Screw |
| 18 | Steering Column Shroud |
| 19 | Ignition Start Switch Bezel |
| 20 | Steering Wheel Assembly |
| 21 | Steering Wheel Nut |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.