SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006COBALT SS, 4D SEDAN, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 157 (ENTERTAINMENT SYSTEM)REPAIR INSTRUCTIONSOVERHEAD CONSOLE - VES REPLACEMENTREMOVAL PROCEDURE
2006 Chevrolet Cobalt SS, 4D Sedan, Standard

Removal Procedure

2006 Chevrolet Cobalt SS, 4D Sedan, StandardSECTION Removal Procedure
WARNING: This page is about a different car, the 2005 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
  1. Flip down the display screen and remove the fasteners.
    Fig 1: View Of Display Screen
    GM1338890Courtesy of GENERAL MOTORS CORP.
  2. Pull down on the rear of the console to disengage the retaining clips.
    Fig 2: View Of Overhead Console Retaining Clips
    GM1338891Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the electrical connections.
    Fig 3: View Of Electrical Connections
    GM1338894Courtesy of GENERAL MOTORS CORP.
  4. Remove the retaining tab from the slot and remove the console from the vehicle.
    Fig 4: View Of Overhead Console
    GM1338906Courtesy of GENERAL MOTORS CORP.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.