Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006COBALT SS, 4D SEDAN, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 156 (DOOR SYSTEM, MIRROR SYSTEM & WINDOW SYSTEM)SPECIFICATIONSFASTENER TIGHTENING SPECIFICATIONS
2006 Chevrolet Cobalt SS, 4D Sedan, Standard
Fastener Tightening Specifications
2006 Chevrolet Cobalt SS, 4D Sedan, StandardSECTION Fastener Tightening Specifications
WARNING: This page is about a different car, the 2005 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Door Applique Screws - Front | 2.2 N.m | 20 lb. in. |
| Door Applique Screws - Rear | 2.2 N.m | 20 lb. in. |
| Door Check Link to Body Bolt - Front | 10 N.m | 89 lb. in. |
| Door Check Link to Body Bolt - Rear | 10 N.m | 89 lb. in. |
| Door Check Link to Door Frame Nuts - Front | 10 N.m | 89 lb. in. |
| Door Check Link to Door Frame Nuts - Rear | 10 N.m | 89 lb. in. |
| Door Handle Screw - Inside | 2.5 N.m | 22 lb. in. |
| Door Hinge to Door Bolts - Front | 25 N.m | 18 ft. lb. |
| Door Hinge to Door Bolts - Rear | 25 N.m | 18 ft. lb. |
| Door Hinge to Hinge Pillar Bolts - Front | 25 N.m | 18 ft. lb. |
| Door Hinge to Hinge Pillar Bolts - Rear | 25 N.m | 18 ft. lb. |
| Door Latch Bolts - Front | 12 N.m | 9 ft. lb. |
| Door Latch Bolts - Rear | 12 N.m | 9 ft. lb. |
| Door Outer Belt Retaining Screw - Front | 2 N.m | 18 lb. in. |
| Door Outer Belt Retaining Screw - Rear | 2 N.m | 18 lb. in. |
| Door Striker Bolts - Front | 25 N.m | 18 ft. lb. |
| Door Striker Bolts - Rear | 25 N.m | 18 ft. lb. |
| Door Trim Panel Screws - Front | 2.5 N.m | 22 lb. in. |
| Door Trim Panel Screws - Rear | 2.5 N.m | 22 lb. in. |
| Door Window Bolts - Rear | 10 N.m | 89 lb. in. |
| Door Window Regulator Bolts - Front | 10 N.m | 89 lb. in. |
| Door Window Regulator Bolts - Rear | 10 N.m | 89 lb. in. |
| Door Window Run Channel Bolts - Front | 10 N.m | 89 lb. in. |
| Door Window Run Channel Bolts - Rear | 10 N.m | 89 lb. in. |
| Outer Belt Seal Fasteners | 2 N.m | 18 lb. in. |
| Outer Door Panel Bolts - Front | 8 N.m | 71 lb. in. |
| Outer Door Panel Bolts - Rear | 8 N.m | 71 lb. in. |
| Outside Rear View Mirror Attachment Nuts | 10 N.m | 89 lb. in. |
| Power Mirror Switch Assembly Screw | 2.5 N.m | 22 lb. in. |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.