Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006COBALT SS, 4D SEDAN, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 111 (ANTILOCK BRAKE SYSTEM, TRACTION CONTROL SYSTEM & STABILITY CONTROL SYSTEM)DIAGNOSTIC INFORMATION AND PROCEDURESSCAN TOOL OUTPUT CONTROLS
2006 Chevrolet Cobalt SS, 4D Sedan, Standard
Scan Tool Output Controls
2006 Chevrolet Cobalt SS, 4D Sedan, StandardSECTION Scan Tool Output Controls
WARNING: This page is about a different car, the 2005 Buick LaCrosse and 2005 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
Scan Tool Output Controls
| Scan Tool Output Control | Additional Menu Selection(s) | Description |
|---|---|---|
| Automated Bleed Procedure | - | Used in order to bleed ABS hydraulics. Refer to ABS Automated Bleed Procedure |
| ABS Warning Lamp | Instrument Panel Display Test | Commands the ABS indicator ON and OFF. |
| LF Inlet Valve Solenoid | Solenoid Test | Commands the solenoid ON and OFF. |
| LF Outlet Valve Solenoid | Solenoid Test | Commands the solenoid ON and OFF. |
| LR Inlet Valve Solenoid | Solenoid Test | Commands the solenoid ON and OFF. |
| LR Outlet Valve Solenoid | Solenoid Test | Commands the solenoid ON and OFF. |
| RF Inlet Valve Solenoid | Solenoid Test | Commands the solenoid ON and OFF. |
| RF Outlet Valve Solenoid | Solenoid Test | Commands the solenoid ON and OFF. |
| RR Inlet Valve Solenoid | Solenoid Test | Commands the solenoid ON and OFF. |
| RR Outlet Valve Solenoid | Solenoid Test | Commands the solenoid ON and OFF. |
| LF Prime Solenoid | Solenoid Test | Commands the solenoid ON and OFF. |
| Steering Angle Sensor Centering | - | Performs the steering wheel centering procedure |
| TCS On/Off test | - | Commands the traction control system ON and OFF. Performs the same function as the traction control switch. |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.