Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DBβ LIVE
HOMESERVICE MANUALSCHEVROLET2006COBALT SS, 4D SEDAN, STANDARDREPAIR AND DIAGNOSISELECTRICALINSTRUMENT PANEL SYSTEM DISPLAYS, GAUGES AND CONSOLECOMPONENT LOCATORINSTRUMENT PANEL, GAGES, AND CONSOLE CONNECTORS
2006 Chevrolet Cobalt SS, 4D Sedan, Standard
Instrument Panel, Gages, and Console Connectors
2006 Chevrolet Cobalt SS, 4D Sedan, StandardSECTION Instrument Panel, Gages, and Console Connectors
Ambient Air Temperature Sensor
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | D-GN/WH | 636 | Outside Ambient Air Temperature Sensor Signal |
| B | YE/BK | 61 | Outside Ambient Temperature Sensor Low Reference |
Driver Information Center (DIC) Switch
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| 5 | GY | 8 | Instrument Panel Lamp Supply Voltage (1) |
| 6 | BK | 550 | Ground |
| 7 | BK/WH | 651 | Signal Ground |
| 8 | PK | 893 | Driver Information Center Select Menu Switch Signal |
| 9 | D-GN/WH | 1358 | Driver Information Center Switch Signal |
| 10 | - | - | Not Used |
Engine Oil Pressure (EOP) Switch
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | TN/BK | 231 | Oil Pressure Switch Signal |
Fuel Gage
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| 1 | PK/BK | 120 | Fuel Pump Supply Voltage |
| 2 | BK | 650 | Ground |
Fuel Pump and Sender Assembly
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| 1 | PK/BK | 120 | Fuel Pump Supply Voltage |
| 2 | BK | 650 | Ground |
Instrument Panel Cluster (IPC)
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| 1 | - | - | Not Used |
| 2 | D-GN/WH | 1358 | Driver Information Center Switch Signal |
| 3-5 | - | - | Not Used |
| 6 | BN/WH | 419 | Check Engine Indicator Control |
| 7 | - | - | Not Used |
| 8 | GY | 8 | Instrument Panel Lamp Supply Voltage (1) |
| 9 | D-GN | 5060 | Low Speed GMLAN Serial Data |
| 10 | PK | 893 | Driver Information Center Select Menu Switch Signal |
| 11 | PK | 339 | Run/Crank Ignition 1 Voltage |
| 12 | - | - | Not Used |
| 13 | RD/WH | 1440 | Battery Positive Voltage |
| 14 | D-GN | 264 | Security Indicator Supply Voltage |
| 15 | BK/WH | 1051 | Signal Ground |
| 16 | BK | 550 | Ground |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.