Diagnostic Code Index

2006 Chevrolet Chevy Express G2500, Van Cargo, 6.6 2SECTION Diagnostic Code Index
DIAGNOSTIC CODE INDEX

DTC Description
DTC B0012, B0013, B0014, B0016, B0017, or B0018 
  • DTC B0012 RF/Passenger Frontal Deployment Loop (Stage 2) Resistance Low
  • DTC B0013 RF/Passenger Frontal Deployment Loop (Stage 2) Open
  • DTC B0014 RF/Passenger Frontal Deployment Loop (Stage 2) Voltage Out of Range
  • DTC B0016 Passenger Frontal Deployment Loop Resistance Low
  • DTC B0017 Passenger Frontal Deployment Loop Open
  • DTC B0018 Passenger Frontal Deployment Loop Voltage Out of Range
DTC B0022, B0024, B0026, B0042, B0043, or B0044 
  • DTC B0022 Driver Frontal Deployment Loop Resistance Low
  • DTC B0024 Driver Frontal Deployment Loop Voltage Out of Range
  • DTC B0026 Driver Frontal Deployment Loop Open
  • DTC B0042 LF/Driver Frontal Deployment (Stage 2) Resistance Low
  • DTC B0043 LF/Driver Frontal Deployment (Stage 2) Voltage Out of Range
  • DTC B0044 LF/Driver Frontal Deployment (Stage 2) Open
DTC B0051  Deployment Commanded
DTC B0053  Deployment Commanded with Loop DTCs Present
DTC B0057, B0058, or B0059 
  • DTC B0057 Right Front/Passenger Pretensioner Deployment Loop Resistance Low
  • DTC B0058 Right Front/Passenger Pretensioner Deployment Loop Open
  • DTC B0059 Right Front/Passenger Pretensioner Deployment Loop Voltage Out of Range
DTC B0064, B0065, or B0066 
  • DTC B0064 Left Front/Driver Pretensioner Deployment Loop Resistance Low
  • DTC B0065 Left Front/Driver Pretensioner Deployment Loop Open
  • DTC B0066 Left Front/Driver Pretensioner Deployment Loop Voltage Out of Range
DTC B0083 or B0084 
  • DTC B0083 Right Front/Passenger Seat Position Sensor Circuit
  • DTC B0084 Left Front/Driver Seat Position Sensor Circuit
DTC B0090  Active Switch Voltage Out of Range
DTC B0091  Active Switch: Wrong State
DTC B0092  Passenger Presence System Performance
DTC B0098  Passenger Presence System Configuration Error
DTC B0100, B0101, or B0102 
  • DTC B0100 Electronic Front End Sensor 1 Performance
  • DTC B0101 Discard Electronic Front End Sensor 1
  • DTC B0102 Incorrect Electronic Front End Sensor 1 Installed
DTC B1001  Option Configuration Error
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.