SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006CHEVY EXPRESS G2500, VAN CARGO, 6.6 2REPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 998 (LIGHTING SYSTEMS)DIAGNOSTIC INFORMATION AND PROCEDURESSCAN TOOL OUTPUT CONTROLS
2006 Chevrolet Chevy Express G2500, Van Cargo, 6.6 2

Scan Tool Output Controls

2006 Chevrolet Chevy Express G2500, Van Cargo, 6.6 2SECTION Scan Tool Output Controls
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Body Control Module (BCM)

Scan Tool Output Control Additional Menu Selection(s) Description
Backup Lamps Exterior Lighting The Body Control Module (BCM) activates the backup lamp relay when you select ON. The backup lamps illuminate for 5 seconds or until commanded OFF.
DRL Exterior Lighting The BCM activates the daytime running lamps (DRL) relay when you select ON. The DRL illuminate for 5 seconds or until commanded OFF.
Fog Lamps Exterior Lighting The BCM activates the fog lamps relay when you select ON. The fog lamps illuminate for 5 seconds or until commanded OFF.
High Beams Exterior Lighting The BCM activates the high beam relay when you select ON. The high beam headlamps illuminate for 5 seconds or until commanded OFF.
LF Turn Signal Exterior Lighting The BCM activates the left front turn signal lamps when you select ON. The turn signal lamps illuminate for 5 seconds or until commanded OFF.
Low Beams Exterior Lighting The BCM activates the low beam relay when you select ON. The low beam headlamps illuminate for 5 seconds or until commanded OFF.
LR Turn Signal Exterior Lighting The BCM activates the left rear turn signal lamps when you select ON. The lamp illuminates for 5 seconds or until commanded OFF.
Parking Lamps Exterior Lighting The BCM activates the park lamp relay when you select ON. The park lamps illuminate for 5 seconds or until commanded OFF.
RF Turn Signal Exterior Lighting The BCM activates the right front turn signal lamps when you select ON. The turn signal lamps illuminate for 5 seconds or until commanded OFF.
RR Turn Signal Exterior Lighting The BCM activates the right rear turn signal lamps when you select ON. The lamp illuminates for 5 seconds or until commanded OFF.
Courtesy Lamp Interior Lighting The BCM activates the interior lamps outputs for 5 seconds when you select ON. The dome, footwell, and courtesy lamps illuminate for 5 seconds or until commanded OFF.
Incandescent Dimming Interior Lighting The BCM activates the interior incandescent type component lamps from full dim to full bright for 5 seconds or until commanded OFF.
LED Dimming Interior Lighting The BCM activates the interior LED type component lamps from full dim to full bright for 5 seconds or until commanded OFF.
Driver Door Switch

Scan Tool Output Control Additional Menu Selection(s) Description
Integrated Sw. Backlighting Test Light Test The driver door switch module activates the switch backlighting when you select ON. The switch backlighting illuminates for 10 seconds or until commanded OFF.
Non-Integrated Backlighting Test Light Test The driver door switch module activates the switch backlighting that is separate from the module when you select ON. The switch backlighting illuminates until commanded OFF.
Puddle/Courtesy Lamp Light Test The driver door switch module activates the puddle and courtesy lamps when you select ON. The lamps remain illuminated for 10 seconds or until commanded OFF.
Export Body Control Module (XBCM)

Scan Tool Output Control Additional Menu Selection(s) Description
Rear Fog Lamps Output Controls The XBCM activates the rear fog lamps when you select ON. The rear fog lamps illuminate until commanded OFF.
Trailer Fog Lamps Output Controls The XBCM activates the trailer fog lamps circuit when you select ON. The trailer fog lamps circuit remains energized until commanded OFF.
Instrument Panel Cluster (IPC)

Scan Tool Output Control Additional Menu Selection(s) Description
Dimming Special Functions The Instrument Panel Cluster (IPC) will dim the PRNDL and DIC display for 5 seconds or until commanded OFF.
Passenger Door Switch

Scan Tool Output Control Additional Menu Selection(s) Description
Integrated Sw. Backlighting Test Light Test The passenger door switch module activates the switch backlighting when you select ON. The switch backlighting illuminates for 10 seconds or until commanded OFF.
Non-Integrated Backlighting Test Light Test The passenger door switch module activates the switch backlighting that is separate from the module when you select ON. The switch backlighting illuminates until commanded OFF.
Puddle/Courtesy Lamp Light Test The passenger door switch module activates the puddle and courtesy lamps when you select ON. The lamps remain illuminated for 10 seconds or until commanded OFF.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.