SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006CHEVY EXPRESS G2500, VAN CARGO, 6.6 2REPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 997 (CELLULAR SYSTEM, ENTERTAINMENT SYSTEM, AND NAVIGATION SYSTEM)COMPONENT LOCATORENTERTAINMENT/COMMUNICATION CONNECTORSVIDEO DISPLAY - FRONT (U42)
2006 Chevrolet Chevy Express G2500, Van Cargo, 6.6 2

Video Display - Front (U42)

2006 Chevrolet Chevy Express G2500, Van Cargo, 6.6 2SECTION Video Display - Front (U42)
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Video Display - Front (U42) Connector End View
GM1711011Courtesy of GENERAL MOTORS CORP.
Video Display - Front (U42) Connector Parts Information

Connector Part Information 
  • OEM: 15490628
  • Service: 89047355
  • Description: 10-Way F Kaizen 0.64 Series (BK)
Terminal Part Information 
  • Terminal/Tray: 7116-4618-02/14
  • Core/Insulation Crimp: P/P
  • Release Tool/Test Probe: J-38125-215/J-35616-64B (L-BU)
Video Display - Front (U42) Connector Terminal Identification

Pin Wire Color Circuit No. Function
1 D-GN 6975 DVD Video Signal (+)
2 WH/BK 5335 DVD Video Signal (-)
3-4 - - Not Used
5 BK 2550 Ground (DNU)
6 BK 2550 Ground
7 RD/WH 3240 Battery Positive Voltage
8 WH 7066 Entertainment Remote Enable Signal
9 PK/BK 5844 Video Bright Control
10 L-GN/BK 5845 Video Module Signal
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.