SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006CHEVY EXPRESS G2500, VAN CARGO, 6.6 2REPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 995 (SUPPLEMENTAL INFLATABLE RESTRAINT SYSTEM)COMPONENT LOCATORSIR CONNECTORSINFLATABLE RESTRAINT STEERING WHEEL MODULE C2
2006 Chevrolet Chevy Express G2500, Van Cargo, 6.6 2

Inflatable Restraint Steering Wheel Module C2

2006 Chevrolet Chevy Express G2500, Van Cargo, 6.6 2SECTION Inflatable Restraint Steering Wheel Module C2
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Inflatable Restraint Steering Wheel Module C2 Connector End View
GM966373Courtesy of GENERAL MOTORS CORP.
Inflatable Restraint Steering Wheel Module C2 Connector Parts Information

Connector Part Information 
  • OEM: 54560222
  • Service: See Catalog
  • Description: 2-Way F ABX-4 Code G (PK)
Terminal Part Information 
  • Terminal/Tray: Not serviced in kit
  • Core/Insulation Crimp: N/A
  • Release Tool/Test Probe: N/A
Inflatable Restraint Steering Wheel Module C2 Connector Terminal Identification

Pin Wire Color Circuit No. Function
A WH 3023 Steering Wheel Module - Stage 2 - High Control
B PK 3022 Steering Wheel Module - Stage 2 - Low Control
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.