SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006CHEVY EXPRESS G2500, VAN CARGO, 6.6 2REPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 925 (ANTI-LOCK BRAKE SYSTEM, TRACTION CONTROL SYSTEM & STABILITY CONTROL SYSTEM)COMPONENT LOCATORANTILOCK BRAKE SYSTEM CONNECTORSYAW AND LATERAL ACCELERATION SENSOR (JL4)
2006 Chevrolet Chevy Express G2500, Van Cargo, 6.6 2

Yaw and Lateral Acceleration Sensor (JL4)

2006 Chevrolet Chevy Express G2500, Van Cargo, 6.6 2SECTION Yaw and Lateral Acceleration Sensor (JL4)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2007 GMC Savana Special, 2007 GMC Savana Camper Special, 2007 GMC Savana, 2007 Chevrolet RV Cutaway, and 2007 Chevrolet Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Yaw and Lateral Acceleration Sensor (JL4) Connector End View
GM697024Courtesy of GENERAL MOTORS CORP.
Yaw and Lateral Acceleration Sensor (JL4) Connector & Terminal Parts Information

Connector Part Information 
  • OEM: 15421324
  • Service: 88953350
  • Description: 6-Way F MQS Sealed (BK)
Terminal Part Information 
  • Terminal/Tray: See Terminal Repair Kit
  • Core/Insulation Crimp: See Terminal Repair Kit
  • Release Tool/Test Probe: See Terminal Repair Kit
Yaw and Lateral Acceleration Sensor (JL4) Terminal Identification

Pin Wire Color Circuit No. Function
1 D-GN 2087 Yaw Rate Sensor 5-Volt Reference
2 L-BU 715 Lateral Accelerometer Signal
3 D-BU 716 Yaw Rate Sensor Signal
4 L-GN/BK 5352 Sensor Self Test Signal Circuit
5 YE 5353 Yaw Rate Frequency
6 L-BU 2088 Yaw Rate Sensor Low Reference
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.