SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006CHEVY EXPRESS G2500, VAN CARGO, 6.6 2REPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 925 (ANTI-LOCK BRAKE SYSTEM, TRACTION CONTROL SYSTEM & STABILITY CONTROL SYSTEM)COMPONENT LOCATORANTILOCK BRAKE SYSTEM CONNECTORSSTEERING WHEEL SPEED/POSITION SENSOR (JL4)
2006 Chevrolet Chevy Express G2500, Van Cargo, 6.6 2

Steering Wheel Speed/Position Sensor (JL4)

2006 Chevrolet Chevy Express G2500, Van Cargo, 6.6 2SECTION Steering Wheel Speed/Position Sensor (JL4)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2007 GMC Savana Special, 2007 GMC Savana Camper Special, 2007 GMC Savana, 2007 Chevrolet RV Cutaway, and 2007 Chevrolet Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Steering Wheel Speed/Position Sensor (JL4) Connector End View
GM280793Courtesy of GENERAL MOTORS CORP.
Steering Wheel Speed/Position Sensor (JL4) Connector & Terminal Parts Information

Connector Part Information 
  • OEM: 12052444
  • Service: 12101874
  • Description: 8-Way F Micro-Pack 100 Series (BK)
Terminal Part Information 
  • Terminal/Tray: 12146447/3
  • Core/Insulation Crimp: E/C
  • Release Tool/Test Probe: 12031876-1/J-35616-6 (BN)
Steering Wheel Speed/Position Sensor (JL4) Terminal Identification

Pin Wire Color Circuit No. Function
1 GY 626 5-Volt Reference
2 OG/BK 556 Steering Wheel Position Sensor Low Reference
3 L-GN 1763 Steering Wheel Position Signal A
4 L-BU 1764 Steering Wheel Position Signal B
5 WH 1765 Steering Wheel Position Marker Pulse Signal
6 L-BU 1059 Steering Wheel Position Sensor Signal 1
7 BN 341 Ignition 3 Voltage
8 BK/WH 351 Ground
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.