SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006CHEVY EXPRESS G2500, VAN CARGO, 6.6 2REPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 916 (FRAME AND UNDERBODY)DIAGNOSTIC INFORMATION AND PROCEDURESALIGNMENT CHECKING3-DIMENSIONAL METHOD
2006 Chevrolet Chevy Express G2500, Van Cargo, 6.6 2

3-Dimensional Method

2006 Chevrolet Chevy Express G2500, Van Cargo, 6.6 2SECTION 3-Dimensional Method
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2007 GMC Savana Special, 2007 GMC Savana Camper Special, 2007 GMC Savana, 2007 Chevrolet RV Cutaway, and 2007 Chevrolet Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  • Measure following multiple points when measuring structural repair with repair equipment:
    • The length
    • The height
    • The width
  • Measure 2/3 of the vehicle body in order to obtain accurate comparisons to the vehicle structure.
  • Univeral measuring systems combine the equipment and the techniques used to make the underbody 3-dimensional measurements. The universal system provides accurate measurements of the following points:
    • The length
    • The width
    • The height
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.