Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Radio Error Messages
The radio displays the following errors:
- CDX ERR
-
Displays if communication is lost with the remote CD changer, if equipped.
- CHECK CD
-
Displays when the player encounters a focus or tracking error.
- CHK CDXX
-
Displays when the CD changer encounters a focus or tracking error, if equipped.
- CHK TAPE
-
Displays if a tape has been inserted but is unable to be played due to an error.
- DOOR OPEN
-
Displays when the CD changer door has been left open, if equipped.
- NO DISC
-
Displays when the radio expected a disc to be inserted.
- NONE
-
Displays when the radio is unable to detect the vehicle speed data information via the class 2 serial data circuit.
- CAL ERR
-
Displays when an invalid calibration procedure is detected.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.