Disc Brake Component Specifications

2006 Chevrolet Chevy Express G2500, Van Cargo, 6.6 2SECTION Disc Brake Component Specifications
WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
Disc Brake Component Specifications

Application Specification
Metric English
Brake Pad Lining Minimum Thickness 2.0 mm 0.080 in
Brake Pad Lining Thickness - New 9.6 mm 0.380 in
Brake Rotor Diameter 296.00 mm 11.654 in
Rotor Minimum Thickness* 24.5 mm 0.960 in
Brake Rotor Maximum Allowable Assembled Lateral Runout 0.06 mm 0.002 in
Brake Rotor Maximum Allowable Scoring 1.50 mm 0.059 in
Brake Rotor Maximum Allowable Thickness Variation 0.025 mm 0.001 in
Brake Rotor Thickness - New 26.0 mm 1.024 in
* All brake rotors have a minimum thickness dimension cast into them. Replace any rotor that is worn or machined below this specification.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.