Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006CHEVY EXPRESS G2500, VAN CARGO, 6.6 2REPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 390 (PERSONALIZATION SYSTEMS)DESCRIPTION AND OPERATIONDRIVER PERSONALIZATIONEASY EXIT SEAT PROGRAMMING
2006 Chevrolet Chevy Express G2500, Van Cargo, 6.6 2
Easy Exit Seat Programming
2006 Chevrolet Chevy Express G2500, Van Cargo, 6.6 2SECTION Easy Exit Seat Programming
WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Perform the following actions in order to program the memory seats for 2 separate drivers:
- Press the correct memory seat button for the specific driver. The seat will move to the last stored memory position.
- Move the seat to the desired exit/entry position.
- Press the exit button and hold for 3 seconds. After pressing the switch a double chime should be heard.
- Repeat the steps for the second driver.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.