Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006CHEVY EXPRESS G2500, VAN CARGO, 6.6 2REPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 294 (ENTERTAINMENT SYSTEM)CAR-NAVIGATION CONTROL SWITCH INSPECTION
2006 Chevrolet Chevy Express G2500, Van Cargo, 6.6 2
Car-Navigation Control Switch Inspection
2006 Chevrolet Chevy Express G2500, Van Cargo, 6.6 2SECTION Car-Navigation Control Switch Inspection
WARNING: This page is about a different car, the 2004 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
- Operate the car-navigation control switch and verify that the car-navigation system operates normally.
- If the system does not operate normally, go to the next step.
- Inspect the wiring harness between the LCD unit and the car-navigation control switch for an open circuit, power short, or a short to ground.
- If there is any malfunction in the wiring harnesses, repair or replace the applicable wiring harness.
- If the wiring harnesses are normal, replace the car-navigation control switch.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.