SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006CHEVY EXPRESS G2500, VAN CARGO, 6.6 2REPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 2256 (WIRING SYSTEMS AND POWER MANAGEMENT - COMPONENT CONNECTOR END VIEWS PART 3)INFLATABLE RESTRAINT STEERING WHEEL MODULE COIL X1
2006 Chevrolet Chevy Express G2500, Van Cargo, 6.6 2

Inflatable Restraint Steering Wheel Module Coil X1

2006 Chevrolet Chevy Express G2500, Van Cargo, 6.6 2SECTION Inflatable Restraint Steering Wheel Module Coil X1
WARNING: This page is about a different car, the 2009 GMC Sierra, 2009 GMC Cab & Chassis Sierra, 2009 Chevrolet Silverado, and 2009 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Inflatable Restraint Steering Wheel Module Coil X1 Connector View
GM1593397Courtesy of GENERAL MOTORS CORP.
Inflatable Restraint Steering Wheel Module Coil X1

Pin Wire Circuit Function
A 0.35 BK 1050 Ground
B 0.35 TN 28 Horn Relay Control
C 0.35 GN/WH 7158 Indicator Dimming Control (K34/KA9)
D-E - - Not Used
F 0.35 PK 1444 12-Volt Reference (UK3/K34)
G 0.35 BN 6136 LED Dimming Supply (K34/KA9/UK3)
H 0.35 L-GN 6818 Steering Wheel Resistor Ladder Signal 1 (UK3)
J - - Not Used
K 0.35 GY 1884 Cruise Control Switch Signal (K34)
Connector Part Information 
  • OEM: 15393433
  • Service: See Catalog
  • Description: 10-Way F Micro-Pack 064 Series (BK)
Terminal Part Information 
  • Terminal/Tray: Service with Pigtail
  • Core/Insulation Crimp: N/A
  • Release Tool/Test Probe: See Terminal Repair Kit
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.