SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006CHEVY EXPRESS G2500, VAN CARGO, 6.6 2REPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 2256 (WIRING SYSTEMS AND POWER MANAGEMENT - COMPONENT CONNECTOR END VIEWS PART 3)INFLATABLE RESTRAINT ROOF RAIL MODULE - PASSENGER (EXTENDED CAB WITH ASF)
2006 Chevrolet Chevy Express G2500, Van Cargo, 6.6 2

Inflatable Restraint Roof Rail Module - Passenger (Extended Cab with ASF)

2006 Chevrolet Chevy Express G2500, Van Cargo, 6.6 2SECTION Inflatable Restraint Roof Rail Module - Passenger (Extended Cab with ASF)
WARNING: This page is about a different car, the 2009 GMC Sierra, 2009 GMC Cab & Chassis Sierra, 2009 Chevrolet Silverado, and 2009 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Inflatable Restraint Roof Rail Module - Passenger (Extended Cab with ASF) Connector End View
GM1957670Courtesy of GENERAL MOTORS CORP.
Inflatable Restraint Roof Rail Module - Passenger (Extended Cab with ASF)

Pin Wire Circuit Function
1 0.5 YE/BK 5021 Right Front Roof Rail Module High Control
2 0.5 WH/BK 5022 Right Front Roof Rail Module Low Control
Connector Part Information 
  • OEM: 13572094
  • Service: See Catalog
  • Description: 2-Way F (YE)
Terminal Part Information 
  • Terminal/Tray: Service with Pigtail
  • Core/Insulation Crimp: N/A
  • Release Tool/Test Probe: See Terminal Repair Kit
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.