Body Control Module (BCM) X7 (Except MEX/A52)

2006 Chevrolet Chevy Express G2500, Van Cargo, 6.6 2SECTION Body Control Module (BCM) X7 (Except MEX/A52)
WARNING: This page is about a different car, the 2009 GMC Sierra, 2009 GMC Cab & Chassis Sierra, 2009 Chevrolet Silverado, and 2009 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Body Control Module (BCM) X7 (Except MEX/A52) Connector End View
GM1664505Courtesy of GENERAL MOTORS CORP.
Body Control Module (BCM) X7 (Except MEX/A52)

Pin Wire Circuit Function
1 - - Not Used
2 0.5 L-GN 38 Backup Lamp Relay Control (SVA)
3-5 - - Not Used
6 0.35 L-BU 5921 Driver Door Unlock Relay Control (Except AN3/DL3)
7 0.35 L-BU 195 Door Lock Control
8 - - Not Used
9 0.35 WH 194 Door Unlock Control
10 - - Not Used
11 0.35 OG/BK 781 Driver Door Lock Switch Unlock Signal (YE9 without AN3/DL3 or Except YE9)
12 0.35 PK/BK 780 Driver Door Lock Switch Lock Signal (YE9 without AN3/DL3 or Except YE9)
13-14 - - Not Used
15 0.5 PU 5059 Intrusion Sensor Alarm ON Signal (SPO Alarm)
16-17 - - Not Used
18 0.35 L-GN 170 Power Window Master Switch Right Rear Up Signal (AN3/DL3 with Crew Cab with A31/HP2 or Extended Cab with ABV)
19 0.35 PU 169 Power Window Master Switch Left Rear Down Signal (AN3/DL3 with Crew Cab with A31/HP2 or Extended Cab with ABV)
20 - - Not Used
21 0.35 D-BU 1307 Power Window Master Switch Lockout Signal (AN3/DL3 with Crew Cab with A31/HP2 or Extended Cab with ABV)
22-25 - - Not Used
26 0.35 PU 171 Power Window Master Switch Right Rear Down Signal (AN3/DL3 with Crew Cab with A31/HP2 or Extended Cab with ABV)
27 0.35 L-BU/WH 280 Power Window Master Switch Lockout Right Rear Signal (AN3/DL3 with Crew Cab with A31 AN3/DL3 with Crew Cab with A31/HP2 or Extended Cab with ABV)
28 0.35 D-GN 168 Power Window Master Switch Left Rear Up Signal (AN3/DL3 with Crew Cab with A31/HP2 or Extended Cab with ABV)
Connector Part Information 
  • OEM: 15466053
  • Service: 88988806
  • Description: 28-Way F Receptacle 0.64 Series (GY)
Terminal Part Information 
  • Pins: 2, 6-7, 9, 11-12, 15, 18-19, 21, 26-28
  • Terminal/Tray: SNAC3-A021T-M0.64/20
  • Core/Insulation Crimp: J/J
  • Release Tool/Test Probe: 12094429/J-35616-64B (L-BU)
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.