SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006CHEVY EXPRESS G2500, VAN CARGO, 6.6 2REPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 2242 (WIRING SYSTEMS AND POWER MANAGEMENT - COMPONENT CONNECTOR END VIEWS - ELECTRONIC COMPASS MODULE TO MEMORY SEAT MODULE (X4))COMPONENT CONNECTOR END VIEWSINFLATABLE RESTRAINT PASSENGER PRESENCE SYSTEM (PPS) MODULE (X88 WITH HP2 OR Z88 WITH HP2)
2006 Chevrolet Chevy Express G2500, Van Cargo, 6.6 2

Inflatable Restraint Passenger Presence System (PPS) Module (X88 with HP2 or Z88 with HP2)

2006 Chevrolet Chevy Express G2500, Van Cargo, 6.6 2SECTION Inflatable Restraint Passenger Presence System (PPS) Module (X88 with HP2 or Z88 with HP2)
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
GM1468542Courtesy of
Connector Part Information
  • Harness Type: Passenger Seat
  • OEM Connector: 15460299
  • Service Connector: Service by Harness - See Part Catalog
  • Description: 18-Way F Micro-Pack 100W Series Sealed (BK)
Terminal Part Information
  • Terminated Lead: Service by Harness - See Part Catalog
  • Release Tool: Not Available
  • Diagnostic Test Probe:J-35616-64B (LBU)
  • Terminal/Tray: Not Available
  • Core/Insulation Crimp: Not Available
Inflatable Restraint Passenger Presence System (PPS) Module (X88 with HP2 or Z88 with HP2)

Pin Wire Circuit Function
1 0.5 RD/WH 4440 Battery Positive Voltage
2-3 - - Not Used
4 0.35 D-GN/WH 5611 Passenger Seat Belt Tension Sensor Signal
5 0.5 BK/WH 2751 Low Reference
6 0.35 YE 5608 Occupant Pressure Sensor Signal
7 0.35 D-GN 5609 Occupant Pressure Sensor Voltage Reference
8-13 - - Not Used
14 0.35 BK/WH 5613 Low Reference
15 0.35 GY 5610 Low Reference
16 0.35 D-GN 5612 Passenger Seat Belt Tension Sensor Voltage Reference
17 0.35 D-GN 5060 Low Speed GMLAN Serial Data
18 - - Not Used
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.