SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006CHEVY EXPRESS G2500, VAN CARGO, 6.6 2REPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 2242 (WIRING SYSTEMS AND POWER MANAGEMENT - COMPONENT CONNECTOR END VIEWS - ELECTRONIC COMPASS MODULE TO MEMORY SEAT MODULE (X4))COMPONENT CONNECTOR END VIEWSINFLATABLE RESTRAINT PASSENGER AIR BAG ON/OFF INDICATOR
2006 Chevrolet Chevy Express G2500, Van Cargo, 6.6 2

Inflatable Restraint Passenger Air Bag On/Off Indicator

2006 Chevrolet Chevy Express G2500, Van Cargo, 6.6 2SECTION Inflatable Restraint Passenger Air Bag On/Off Indicator
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
GM1538776Courtesy of
Connector Part Information
  • Harness Type: Overhead Console
  • OEM Connector: 15398877
  • Service Connector: 88988112
  • Description: 5-Way F HCM Series (WH)
Terminal Part Information
  • Terminated Lead: Service by Connector Assembly- 88988112
  • Release Tool: Not Available
  • Diagnostic Test Probe: J-35616-64B (L-BU)
  • Terminal/Tray: Not Available
  • Core/Insulation Crimp: Not Available
Inflatable Restraint Passenger Air Bag On/Off Indicator

Pin Wire Circuit Function
1 0.35 D-BU 2307 Passenger Air Bag On Indicator Control
2 0.5 BK 1050 Ground
3 0.35 D-GN/BK 2308 Passenger Air Bag Off Indicator Control
4 0.35 PK 1139 Ignition Voltage
5 0.35 PU 5234 Passenger Seat Belt Indicator
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.