SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006CHEVY EXPRESS G2500, VAN CARGO, 6.6 2REPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 2240 (WIRING SYSTEMS AND POWER MANAGEMENT - COMPONENT CONNECTOR END VIEWS - A/C COMPRESSOR TO EBCM (JH6))COMPONENT CONNECTOR END VIEWSASSIST STEP CONTROL MODULE X1 (BRS)
2006 Chevrolet Chevy Express G2500, Van Cargo, 6.6 2

Assist Step Control Module X1 (BRS)

2006 Chevrolet Chevy Express G2500, Van Cargo, 6.6 2SECTION Assist Step Control Module X1 (BRS)
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
GM1626671Courtesy of
Connector Part Information
  • Harness Type: Chassis
  • OEM Connector: 15476196
  • Service Connector: 13580872
  • Description: 6-Way F GT 280 Series, Sealed (BK)
Terminal Part Information
  • Terminated Lead: 13575403
  • Release Tool: J-38125-553
  • Diagnostic Test Probe: J-35616-4A (PU)
  • Terminal/Tray: 15304720/19
  • Core/Insulation Crimp: 4/5
Assist Step Control Module X1 (BRS)

Pin Wire Circuit Function
1 2 D-GN 7469 Articulating Running Board Motor Right Control Retract
2 3 BK 1350 Ground
3 2 OG 7471 Articulating Running Board Motor Left Control Extend
4 2 D-BU 7470 Articulating Running Board Motor Right Control Extend
5 3 RD/BK 1142 Battery Positive Voltage
6 2 GY 7472 Articulating Running Board Motor Left Control Retract
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.