SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006CHEVY EXPRESS G2500, VAN CARGO, 6.6 2REPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 2154 (WIRING SYSTEMS AND POWER MANAGEMENT - COMPONENT CONNECTOR END VIEWS - MEMORY SEAT MODULE (X5) TO YAW SENSOR)COMPONENT CONNECTOR END VIEWSSEAT ADJUSTER SWITCH - DRIVER (AN3)
2006 Chevrolet Chevy Express G2500, Van Cargo, 6.6 2

Seat Adjuster Switch - Driver (AN3)

2006 Chevrolet Chevy Express G2500, Van Cargo, 6.6 2SECTION Seat Adjuster Switch - Driver (AN3)
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
GM623046Courtesy of
Connector Part Information
  • Harness Type: Driver Seat
  • OEM Connector: 15326931
  • Service Connector: 15306309
  • Description: 10-Way F GT 280 Series (BK)
Terminal Part Information
  • Terminated Lead: 13575753
  • Release Tool: J-38125-553
  • Diagnostic Test Probe: J-35616-4A (PU)
  • Terminal/Tray: 15304711/8
  • Core/Insulation Crimp: E/A
Seat Adjuster Switch - Driver (AN3)

Pin Wire Circuit Function
A 0.35 D-GN 1518 Front Vertical Up Switch Signal
B - - Not Used
C 0.35 L-GN 1523 Horizontal Rearward Switch Signal
D 0.35 TN 1522 Horizontal Forward Switch Signal
E 0.35 PU/WH 6205 Battery Positive Voltage
F 0.35 YE 1519 Rear Vertical Up Switch Signal
G 0.35 D-GN/WH 1270 Recline Rearward Switch Signal
H 0.35 GY/BK 1269 Recline Forward Switch Signal
J 0.35 L-BU 1521 Rear Vertical Down Switch Signal
K 0.35 D-BU 1520 Front Vertical Down Switch Signal
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.