Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006CHEVY EXPRESS G2500, VAN CARGO, 6.6 2REPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 2112 (AUTOMATIC TRANSMISSION - 2ML70 - COMPONENT LOCATOR)COMPONENT LOCATORDISASSEMBLED VIEWSINPUT HOUSING MODULE AND PUMP ASSEMBLY
2006 Chevrolet Chevy Express G2500, Van Cargo, 6.6 2
Input Housing Module and Pump Assembly
2006 Chevrolet Chevy Express G2500, Van Cargo, 6.6 2SECTION Input Housing Module and Pump Assembly
WARNING: This page is about a different car, the 2011 GMC Yukon, 2011 Chevrolet Tahoe, and 2011 Cadillac Escalade. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| 200 | A/Trans Torque Dampener Fluid Seal Retaining Ring |
| 201 | A/Trans Fluid Pump Seal |
| 202 | A/Trans Torque Dampener (w/Fluid Pump) Housing Assembly |
| 203 | Input Shaft Bushing |
| 204 | A/Trans Fluid Pump Slide O-Ring Seal |
| 205 | A/Trans Fluid Pump Slide Seal Support |
| 206 | A/Trans Fluid Pump Slide Seal |
| 207 | A/Trans Fluid Pump Slide Outer Spring |
| 208 | A/Trans Fluid Pump Slide |
| 209 | A/Trans Fluid Pump Slide Pivot Pin |
| 210 | A/Trans Fluid Pump Vane Ring |
| 211 | A/Trans Fluid Pump Rotor Guide |
| 212 | A/Trans Fluid Pump Vane |
| 213 | A/Trans Fluid Pump Rotor |
| 214 | Pump Slide Fluid Seal Ring |
| 215 | A/Trans Fluid Pump Air Bleed Orifice |
| 216 | A/Trans Torque Dampener Fluid Passage Plug |
| 217 | Pressure Regulator Valve Pin |
| 218 | Valve Retaining Plug |
| 219 | Isolator Valve |
| 220 | A/Trans Fluid Pump Valve Inner Spring |
| 221 | A/Trans Fluid Pump and Auxiliary Fluid Pump Valve |
| 222 | Pressure Relief Ball Valve Spring Pin |
| 223 | Pressure Relief Ball Valve Spring |
| 224 | Pressure Relief Ball Valve |
| 225 | A/Trans Fluid Cooler Bypass Valve |
| 226 | A/Trans Fluid Cooler Bypass Valve Spring |
| 227 | Decrease Orifice |
| 228 | A/Trans Fluid Pump Cover Bolt |
| 229 | A/Trans Fluid Pump Cover Assembly |
| 230 | Transmission Lube Fluid Pressure Regulator Valve |
| 231 | Pressure Regulator Valve Spring |
| 232 | Pressure Regulator Valve Stop |
| 233 | Pressure Regulator Valve |
| 234 | Pressure Regulator Valve Inner Spring |
| 235 | Pressure Regulator Valve Outer Spring |
| 236 | Isolator Valve |
| 237 | Isolator Valve Sleeve |
| 238 | Transmission Fluid Cooler Pipe Fitting Seal |
| 239 | A/Trans Fluid Pump Valve Outer Spring |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.