SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006CHEVY EXPRESS G2500, VAN CARGO, 6.6 2REPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 2101 (WIRING SYSTEMS AND POWER MANAGEMENT - COMPONENT CONNECTOR END VIEWS - A/C COMPRESSOR THROUGH ELECTRONIC POWER STEERING MODULE X1)COMPONENT CONNECTOR END VIEWSAUXILIARY BODY CONTROL MODULE (XBCM) X2 (EXP)
2006 Chevrolet Chevy Express G2500, Van Cargo, 6.6 2

Auxiliary Body Control Module (XBCM) X2 (EXP)

2006 Chevrolet Chevy Express G2500, Van Cargo, 6.6 2SECTION Auxiliary Body Control Module (XBCM) X2 (EXP)
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Auxiliary Body Control Module (XBCM) X2 (EXP) Connector End View
GM1552610Courtesy of GENERAL MOTORS CORP.
Auxiliary Body Control Module (XBCM) X2 (EXP)

Pin Wire Circuit Function
A 0.35 L-BU 1620 CHMSL Control
B 0.35 RD/WH 4540 Battery Positive Voltage
C-F - - Not Used
G 0.35 OG 122 Rear Fog Lamp Control
H 0.35 PU 7142 Trailer Fog Lamp
Connector Part Information
  • Harness Type: Instrument Panel
  • OEM Connector: 15357040
  • Service Connector: 12110626
  • Description: 8-Way F Metri-Pack 280 (L-GY)
Terminal Part Information
  • Terminated Lead: 13575721
  • Release Tool: J-38125-553
  • Diagnostic Test Probe: J-35616-4A (PU)
  • Terminal/Tray: 12110844/4
  • Core/Insulation Crimp: Pins A, B - C/A
  • Core/Insulation Crimp: Pins G, H - E/A
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.