SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006CHEVY EXPRESS G2500, VAN CARGO, 6.6 2REPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 2000 (CELLULAR SYSTEM, ENTERTAINMENT SYSTEM, AND NAVIGATION SYSTEM)REPAIR INSTRUCTIONSANTENNA CABLE REPLACEMENT (W/O FIXED ANTENNA)
2006 Chevrolet Chevy Express G2500, Van Cargo, 6.6 2

Antenna Cable Replacement (W/O Fixed Antenna)

2006 Chevrolet Chevy Express G2500, Van Cargo, 6.6 2SECTION Antenna Cable Replacement (W/O Fixed Antenna)
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Radio Antenna Cable
GM1769282Courtesy of GENERAL MOTORS CORP.
Antenna Cable Replacement (W/O Fixed Antenna)

Callout Component Name

Preliminary Procedure

  1. Remove the right windshield pillar molding. Refer to Windshield Pillar Garnish Molding Replacement .
  2. Remove the instrument panel upper trim pad. Refer to Instrument Panel Upper Trim Panel with Windshield Defroster Nozzle Grille Replacement (Cadillac) , Instrument Panel Upper Trim Panel with Windshield Defroster Nozzle Grille Replacement (Except Cadillac) .
  3. Remove the right lock pillar garnish molding. Refer to Body Lock Pillar Garnish Molding Replacement (Standard Wheelbase) , Body Lock Pillar Garnish Molding Replacement (Avalanche/Escalade EXT) , Body Lock Pillar Garnish Molding Replacement (Extended Wheelbase) .
  4. Remove the screw from the HVAC duct and reposition the duct away from the antenna module to allow access.
  5. Remove the right rear quarter trim panel. Refer to Rear Quarter Trim Panel Replacement - Right Side (Extended Wheelbase) , Rear Quarter Trim Panel Replacement - Right Side (Standard Wheelbase) .
  6. Lower the headliner. Refer to Headlining Trim Panel Replacement (LWB w/U42 w/o CF5) , Headlining Trim Panel Replacement (LWB w/CJ2) , Headlining Trim Panel Replacement (SWB w/o CF5 and U42) , Headlining Trim Panel Replacement (LWB w/CJ3) , Headlining Trim Panel Replacement (Avalanche/Escalade EXT w/CF5 w/o U42) , Headlining Trim Panel Replacement (SWB w/CF5 w/o U42) , Headlining Trim Panel Replacement (Avalanche/Escalade EXT w/U24 w/o CF5) , Headlining Trim Panel Replacement (LWB w/CF5 and U42) , Headlining Trim Panel Replacement (Avalanche/Escalade EXT w/CF5 and U42) , Headlining Trim Panel Replacement (Avalanche/Escalade EXT w/CJ3) , Headlining Trim Panel Replacement (SWB w/CF5 and U42) , Headlining Trim Panel Replacement (SWB w/U42 w/o CF5) , Headlining Trim Panel Replacement (LWB w/CF5 w/o U42) , Headlining Trim Panel Replacement (SWB w/CJ3) , Headlining Trim Panel Replacement (Avalanche w/CJ2 w/o CF5 and U42) .
1 Radio Antenna Cable
  1. Disconnect the antenna cable from the extension cable located on the top of the instrument panel on the right side.
  2. Disconnect the antenna cable from the antenna module.
  3. Note the routing of the antenna cable on the headliner for aid in installation.
  4. Remove the antenna cable from the headliner.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.