SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006CHEVY EXPRESS G2500, VAN CARGO, 6.6 2REPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1852 (ENGINE COOLING SYSTEM - HYBRID)REPAIR INSTRUCTIONSGENERATOR CONTROL MODULE COOLANT OUTLET HOSE REPLACEMENT
2006 Chevrolet Chevy Express G2500, Van Cargo, 6.6 2

Generator Control Module Coolant Outlet Hose Replacement

2006 Chevrolet Chevy Express G2500, Van Cargo, 6.6 2SECTION Generator Control Module Coolant Outlet Hose Replacement
WARNING: This page is about a different car, the 2010 GMC Sierra and 2010 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Generator Control Module Coolant Outlet Hose
GM1968400Courtesy of GENERAL MOTORS CORP.
Callout Component Name

Preliminary Procedures

  1. Drain the cooling system. Refer to Generator Control Module Cooling System Draining and Filling .
  2. Remove the air cleaner. Refer to Air Cleaner Assembly Replacement .
  3. Remove the air cleaner resonator outlet duct. Refer to Air Cleaner Resonator Outlet Duct Replacement .
1 Generator Control Module Coolant Outlet Hose
Procedure: 
Using J 38185  reposition the generator control module coolant hose clamps.
Special Tools: 
J 38185  Hose Clamp Pliers
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.