Installation Procedure

2006 Chevrolet Chevy Express G2500, Van Cargo, 6.6 2SECTION Installation Procedure
WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Sunroof Window
    GM964577Courtesy of GENERAL MOTORS CORP.
  1. Position the sunroof window into the opening.
  2. Install the sunroof window screws. Do not tighten the screws.
  3. Carefully close the sunroof window from the vent position to the full closed position.
  4. Adjust the sunroof window. Refer to Sunroof Window Height and Opening Fit AdjustmentΒ .
  5. CAUTION: Refer to Fastener Caution .
  6. Tighten the sunroof window screws to 5 N.m (44 lb in).
  7. Install the sunroof panel side opening closeout. Refer to Sunroof Panel Side Opening Closeout Cover ReplacementΒ .
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.