Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DBβ LIVE
HOMESERVICE MANUALSCHEVROLET2006CHEVY EXPRESS G2500, VAN CARGO, 6.6 2REPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1711 (AUTOMATIC TRANSMISSION - 2MT70 - INTRODUCTION)SPECIFICATIONSTAPER BEARING PRELOAD SELECTIVE SPECIFICATIONS
2006 Chevrolet Chevy Express G2500, Van Cargo, 6.6 2
Taper Bearing Preload Selective Specifications
2006 Chevrolet Chevy Express G2500, Van Cargo, 6.6 2SECTION Taper Bearing Preload Selective Specifications
WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
| Front Differential Drive Pinion Gear and Differential Thrust Washer Selection Chart Thrust Washer O.D. Color Chart |
Washer Thickness | |
|---|---|---|
| Metric | English | |
| Dark Blue (Left Side) | 0.429 mm | 0.016 in |
| Light Green (Left Side) | 0.561 mm | 0.022 in |
| Plain (Left Side) | 0.696 mm | 0.027 in |
| White (Left Side) | 0.823 mm | 0.032 in |
| Light Blue (Left Side) | 0.957 mm | 0.037 in |
| Dark Blue (Right Side) | 0.609 mm | 0.023 in |
| Light Green (Right Side) | 0.721 mm | 0.028 in |
| Plain (Right Side) | 0.810 mm | 0.031 in |
| White (Right Side) | 0.912 mm | 0.035 in |
| Light Blue (Right Side) | 1.026 mm | 0.040 in |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.