Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006CHEVY EXPRESS G2500, VAN CARGO, 6.6 2REPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 158 (SUPPLEMENTAL INFLATABLE RESTRAINT SYSTEM)
2006 Chevrolet Chevy Express G2500, Van Cargo, 6.6 2
Section 158 (Supplemental Inflatable Restraint System)
2006 Chevrolet Chevy Express G2500, Van Cargo, 6.6 2SECTION Section 158 (Supplemental Inflatable Restraint System)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2003 GMC Savana Special, 2003 GMC Savana Camper Special, 2003 GMC Savana, 2003 Chevrolet RV Cutaway, and 2003 Chevrolet Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
- Description & Operation
- Component Locations
- System Operation Check
- Air Bag Safety Precautions
- Adjustments
- Disabling & Activating Air Bag System
- Disposal Procedures
- Post-Collision Inspection
- Removal & Installation
- Diagnostics
- Diagnostic Tests
- Sir Diagnostic System Check
- Connector Identification
- Air Bag Warning Light Malfunction
- DTC B0012,B0013,B0014, B0016,B0017,B0018: Passenger-Side Air Bag Deployment Loop Stage 2 Resistance Low/Stage 2 Resistance High/Stage 2 Voltage High/Stage 1 Resistance Low/Stage 1 Resistance High/Stage 1 Voltage High
- DTC B0022, B0024, B0026, B0042,B0043, B0044: Driver Deployment Loop Stage 1 Resistance Low/Stage1 Voltage High/Stage 1 Resistance High/Stage 2 Resistance Low/Stage 2 Voltage High/Stage 2 Resistance High
- DTC B0051: Deployment Commanded
- DTC B0053: Deployment Commanded With Loop Malfunction
- DTC B0057, B0058, B0059: Passenger-Side Seat Belt PRETENSIONER Deployment Loop Resistance Low/Resistance High/Voltage High
- DTC B0064, B0065, B0066: Driver-Side Seat Belt PRETENSIONER Deployment Loop Resistance Low/ Resistance High/Voltage High
- DTC B0083, B0084: Driver Or Passenger SPS Circuit Amperage Out Of Range
- DTC B0090: Air Bag Disable Switch Voltage Out Of Range
- DTC B0091: Air Bag Disable Switch Wrong State
- DTC B0100, B0101, B0102: EFS Valid Identification Message Not Received/ EFS NOK Message/EFS Incorrect Identification
- DTC B1000: SDM Malfunction
- DTC B1001: Option Configuration Error
- Wire Repair
- Torque Specifications
- Wiring Diagrams
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.