Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006CHEVY EXPRESS G2500, VAN CARGO, 6.6 2REPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1568 (POWER STEERING SYSTEM)COMPONENT LOCATORPOWER STEERING PUMP DISASSEMBLED VIEW
2006 Chevrolet Chevy Express G2500, Van Cargo, 6.6 2
Power Steering Pump Disassembled View
2006 Chevrolet Chevy Express G2500, Van Cargo, 6.6 2SECTION Power Steering Pump Disassembled View
WARNING: This page is about a different car, the 2009 GMC Sierra, 2009 GMC Cab & Chassis Sierra, 2009 Chevrolet Silverado, and 2009 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| 1 | Power Steering Fluid Reservoir |
| 2 | Power Steering Fluid Reservoir Cap |
| 3 | Power Steering Fluid Reservoir Stud |
| 4 | Power Steering Fluid Reservoir Stud |
| 5 | Power Steering Pump Fitting |
| 6 | Power Steering Pump Fitting Seal |
| 7 | Power Steering Pump Flow Control Valve |
| 8 | Power Steering Pump Flow Control Valve Spring |
| 9 | Power Steering Pump Housing Seal |
| 10 | Power Steering Pump Housing Seals |
| 11 | Power Steering Fluid Reservoir Seal |
| 12 | Power Steering Pump |
| 13 | Power Steering Pump Shaft Seal |
| 14 | Power Steering Fluid Reservoir Magnet |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.