Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006CHEVY EXPRESS G2500, VAN CARGO, 6.6 2REPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1517 (BUMPER SYSTEM AND FASCIA)SPECIFICATIONSFASTENER TIGHTENING SPECIFICATIONS
2006 Chevrolet Chevy Express G2500, Van Cargo, 6.6 2
Fastener Tightening Specifications
2006 Chevrolet Chevy Express G2500, Van Cargo, 6.6 2SECTION Fastener Tightening Specifications
WARNING: This page is about a different car, the 2009 GMC Sierra, 2009 GMC Cab & Chassis Sierra, 2009 Chevrolet Silverado, and 2009 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Front Bumper Brace Bolts | 15 N.m | 11 lb ft |
| Front Bumper Bracket Bolts (1500 Series) | 50 N.m | 37 lb ft |
| Front Bumper Bracket Bolts (2500 Series) | 70 N.m | 52 lb ft |
| Front Bumper Fascia To Side Support Bracket Bolts | 2.8 N.m | 25 lb in |
| Front Bumper Filler Panel Bolts | 9 N.m | 80 lb in |
| Front Bumper Outboard Brace Plate Bolts | 9 N.m | 80 lb in |
| Headlamp Bracket Bolts | 9 N.m | 80 lb in |
| Lower Frame Rail To Bracket Bolts | 100 N.m | 74 lb ft |
| Radiator Support Bolts | 9 N.m | 80 lb in |
| Rear Bumper Plate Nuts | 90 N.m | 66 lb ft |
| Rear Impact Bar Bolts | 50 N.m | 37 lb ft |
| Side Frame Rail To Bracket Bolts | 40 N.m | 30 lb ft |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.