SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006CHEVY EXPRESS G2500, VAN CARGO, 6.6 2REPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1428 (FRAME AND UNDERBODY)REPAIR INSTRUCTIONSASSIST STEP PAD REPLACEMENT (POWER)
2006 Chevrolet Chevy Express G2500, Van Cargo, 6.6 2

Assist Step Pad Replacement (Power)

2006 Chevrolet Chevy Express G2500, Van Cargo, 6.6 2SECTION Assist Step Pad Replacement (Power)
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Power Assist Step Pad
GM1809551Courtesy of GENERAL MOTORS CORP.
Callout Component Name
1 Power Assist Step Pad

Procedure

  1. Deploy the power assist step.
  2. Use a trim panel removal tool to help ease the release of the clips holding the pad in.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.