SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006CHEVY EXPRESS G2500, VAN CARGO, 6.6 2REPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1356 (COMPONENT LOCATIONS & COMPONENT CONNECTOR END VIEWS)COMPONENT CONNECTOR END VIEWSMEMORY SEAT MODULE (MSM) (A45) X7
2006 Chevrolet Chevy Express G2500, Van Cargo, 6.6 2

Memory Seat Module (MSM) (A45) X7

2006 Chevrolet Chevy Express G2500, Van Cargo, 6.6 2SECTION Memory Seat Module (MSM) (A45) X7
WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Memory Seat Module (MSM) (A45) X7 Connector End View
GM1715226Courtesy of GENERAL MOTORS CORP.
Memory Seat Module (MSM) (A45) X7

Pin Wire Circuit Function
1-6 - - Not Used
7 0.35 D-GN 1518 Power Seat Front Vertical Up Switch Signal
8 0.35 YE 1519 Power Seat Rear Vertical Up Switch Signal
9 0.35 TN 1522 Power Seat Horizontal Forward Switch Signal
10 0.35 GY/BK 1269 Power Seat Recline Forward Switch Signal
11-15 - - Not Used
16 0.35 D-GN 5060 Low Speed GMLAN Serial Data
17 0.35 D-BU 1520 Power Seat Front Vertical Down Switch Signal
18 0.35 L-BU 1521 Power Seat Rear Vertical Down Switch Signal
19 0.35 L-GN 1523 Power Seat Horizontal Rearward Switch Signal
20 0.35 D-GN/WH 1270 Power Seat Recline Rearward Switch Signal
Connector Part Information 
  • OEM: 15126709
  • Service: See Catalog
  • Description: 20-Way F (BN)
Terminal Part Information 
  • Terminal/Tray: See Terminal Repair Kit
  • Core/Insulation Crimp: See Terminal Repair Kit
  • Release Tool/Test Probe: See Terminal Repair Kit
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.