SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006CHEVY EXPRESS G2500, VAN CARGO, 6.6 2REPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1356 (COMPONENT LOCATIONS & COMPONENT CONNECTOR END VIEWS)COMPONENT CONNECTOR END VIEWSMEMORY SEAT MODULE (MSM) (A45) X5
2006 Chevrolet Chevy Express G2500, Van Cargo, 6.6 2

Memory Seat Module (MSM) (A45) X5

2006 Chevrolet Chevy Express G2500, Van Cargo, 6.6 2SECTION Memory Seat Module (MSM) (A45) X5
WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Memory Seat Module (MSM) (A45) X5 Connector End View
GM1715223Courtesy of GENERAL MOTORS CORP.
Memory Seat Module (MSM) (A45) X5

Pin Wire Circuit Function
1 0.35 YE/BK 2079 Seat Cushion Temperature Sensor Signal
2 0.35 GY 2434 Passenger Seat Cushion Temperature Sensor Signal
3-8 - - Not Used
9 0.35 OG 2153 Steering Column Telescope Sensor Signal
10 - - Not Used
11 0.35 TN 6207 Memory Sensor High Reference
12-13 - - Not Used
14 0.35 BN/WH 557 Front Vertical Seat Motor Position Sensor Signal
15 0.35 TN 568 Rear Vertical Seat Motor Position Sensor Signal
16 0.35 D-GN 569 Horizontal Seat Motor Position Sensor Signal
17 0.35 WH/BK 570 Driver Seat Recline Motor Position Sensor Signal
18 - - Not Used
19 0.35 YE 1063 Driver Seat Lumbar Horizontal Position Sensor Signal
20 0.35 OG 2154 Steering Column Tilt Sensor Signal
Connector Part Information 
  • OEM: 15126711
  • Service: See Catalog
  • Description: 20-Way F (BK)
Terminal Part Information 
  • Terminal/Tray: See Terminal Repair Kit
  • Core/Insulation Crimp: See Terminal Repair Kit
  • Release Tool/Test Probe: See Terminal Repair Kit
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.