SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006CHEVY EXPRESS G2500, VAN CARGO, 6.6 2REPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1356 (COMPONENT LOCATIONS & COMPONENT CONNECTOR END VIEWS)COMPONENT CONNECTOR END VIEWSMEMORY SEAT MODULE (MSM) (A45) X4
2006 Chevrolet Chevy Express G2500, Van Cargo, 6.6 2

Memory Seat Module (MSM) (A45) X4

2006 Chevrolet Chevy Express G2500, Van Cargo, 6.6 2SECTION Memory Seat Module (MSM) (A45) X4
WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Memory Seat Module (MSM) (A45) X4 Connector End View
GM1664549Courtesy of GENERAL MOTORS CORP.
Memory Seat Module (MSM) (A45) X4

Pin Wire Circuit Function
1-6 - - Not Used
7 1 BK 2112 Steering Column Tilt Motor Control - Down
8 1 RD 2111 Steering Column Tilt Motor Control - Up
9-11 - - Not Used
12 1 D- BU 611 Driver Seat Lumbar Motor Forward Control
13 1 PK 610 Driver Seat Lumbar Motor Rearward Control
14 .8 PK 2480 Passenger Seat Cushion Heated/Cool Ventilation Module Cool Control
15 1 L-GN 276 Driver Seat Recline Motor Forward Control
16 1 L-BU 277 Driver Seat Recline Motor Rearward Control
Connector Part Information 
  • OEM: 15134092
  • Service: See Catalog
  • Description: 16-Way F (GN)
Terminal Part Information 
  • Terminal/Tray: See Terminal Repair Kit
  • Core/Insulation Crimp: See Terminal Repair Kit
  • Release Tool/Test Probe: See Terminal Repair Kit
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.