SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006CHEVY EXPRESS G2500, VAN CARGO, 6.6 2REPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1356 (COMPONENT LOCATIONS & COMPONENT CONNECTOR END VIEWS)COMPONENT CONNECTOR END VIEWSLUMBAR HORIZONTAL MOTOR ASSEMBLY - DRIVER (AL2)
2006 Chevrolet Chevy Express G2500, Van Cargo, 6.6 2

Lumbar Horizontal Motor Assembly - Driver (AL2)

2006 Chevrolet Chevy Express G2500, Van Cargo, 6.6 2SECTION Lumbar Horizontal Motor Assembly - Driver (AL2)
WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Lumbar Horizontal Motor Assembly - Driver (AL2) Connector End View
GM39689Courtesy of GENERAL MOTORS CORP.
Lumbar Horizontal Motor Assembly - Driver (AL2)

Pin Wire Circuit Function
A 1 D-BU 611 Driver Seat Lumbar Motor Forward Control
B 1 PK 610 Driver Seat Lumbar Motor Rearward Control
C 0.35 GY 6206 Memory Sensor Low Reference
D 0.35 TN 6207 Memory Sensor High Reference
E 0.35 YE 1063 Driver Seat Lumbar Horizontal Position Sensor Signal
F - - Not Used
Connector Part Information 
  • OEM: 12064754
  • Service: See Catalog
  • Description: 6-Way F (BK)
Terminal Part Information 
  • Terminal/Tray: See Terminal Repair Kit
  • Core/Insulation Crimp: See Terminal Repair Kit
  • Release Tool/Test Probe: See Terminal Repair Kit
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.