Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006CHEVY EXPRESS G2500, VAN CARGO, 6.6 2REPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1343 (MIRROR SYSTEMS)DIAGNOSTIC INFORMATION AND PROCEDURESDIAGNOSTIC CODE INDEX
2006 Chevrolet Chevy Express G2500, Van Cargo, 6.6 2
Diagnostic Code Index
2006 Chevrolet Chevy Express G2500, Van Cargo, 6.6 2SECTION Diagnostic Code Index
WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
DIAGNOSTIC CODE INDEX
| DTC | Description |
|---|---|
| DTC B1544, B1600, or B1605 | B1544 01: Mirror Motors Common Circuit Short to Battery B1544 02: Mirror Motors Common Circuit Short to Ground B1544 04: Mirror Motors Common Circuit Open B1600 01: Mirror Motor Vertical Circuit Short to Battery B1600 02: Mirror Motor Vertical Circuit Short to Ground B1600 04: Mirror Motor Vertical Circuit Open B1605 01: Mirror Motor Horizontal Circuit Short to Battery B1605 02: Mirror Motor Horizontal Circuit Short to Ground B1605 04: Mirror Motor Horizontal Circuit Open |
| DTC B1580 or B1590 | B1580: Mirror Horizontal Position Sensor Circuit B1590: Mirror Vertical Position Sensor Circuit |
| DTC B1640 | B1640 01: Mirror Heater Circuit Short to Battery B1640 02: Mirror Heater Circuit Short to Ground |
| DTC B1722 | B1715 02: Mirror Power Fold Control Switch Circuit Short to Ground |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.