Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006CHEVY EXPRESS G2500, VAN CARGO, 6.6 2REPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1341 (BATTERY, CHARGING SYSTEM AND STARTING SYSTEM)SPECIFICATIONSFASTENER TIGHTENING SPECIFICATIONS
2006 Chevrolet Chevy Express G2500, Van Cargo, 6.6 2
Fastener Tightening Specifications
2006 Chevrolet Chevy Express G2500, Van Cargo, 6.6 2SECTION Fastener Tightening Specifications
WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Battery Cable to Battery Bolt | 17 N.m | 13 lb ft |
| Battery Negative Cable to Engine Block Bolt (LH2, LC3) | 25 N.m | 18 lb ft |
| Battery Negative Cable to Engine Block Stud (LY7) | 50 N.m | 37 lb ft |
| Battery Negative Cable to Shock Tower Bolt (LH2, LC3) | 10 N.m | 89 lb in |
| Battery Negative Cable to Side Rail Bolt (LY7) | 36 N.m | 27 lb ft |
| Battery Positive Cable to Starter Terminal Nut (LH2, LC3) | 10 N.m | 89 lb in |
| Battery Positive Cable to Starter Terminal Nut (LY7) | 13 N.m | 115 lb in |
| Battery Positive Cable to Underhood Fuse Block Nut | 15 N.m | 11 lb ft |
| Battery Retainer Bolt | 18 N.m | 13 lb ft |
| Battery Tray Bolt | 6 N.m | 53 lb in |
| Generator Bolt | 50 N.m | 37 lb ft |
| Generator Bracket Bolt | 50 N.m | 37 lb ft |
| Generator Bracket Bolt (LY7) | 23 N.m | 17 lb ft |
| Generator Output Battery Terminal Nut (LH2, LC3) | 10 N.m | 89 lb in |
| Generator Output Battery Terminal Nut (LY7) | 13 N.m | 115 lb in |
| Ground Strap to Cam Cover Bolt (LH2, LC3) | 10 N.m | 89 lb in |
| Ground Strap to Cylinder Head Bolt (LH2. LC3) | 25 N.m | 18 lb ft |
| Starter Motor Bolt (LC3) | 25 N.m | 34 lb ft |
| Starter Motor Bolt (LH2) | 30 N.m | 22 lb ft |
| Starter Motor Bolt (LY7) | 50 N.m | 37 lb ft |
| Starter Solenoid S Terminal Nut (LH2, LC3) | 4 N.m | 35 lb in |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.