SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006CHEVY EXPRESS G2500, VAN CARGO, 6.6 2REPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1327 (CELLULAR SYSTEM, ENTERTAINMENT SYSTEM, AND NAVIGATION SYSTEM)REPAIR INSTRUCTIONSRADIO, VIDEO, AUDIO DISC PLAYER, AND NAVIGATION INFORMATION DISPLAY REPLACEMENT
2006 Chevrolet Chevy Express G2500, Van Cargo, 6.6 2

Radio, Video, Audio Disc Player, and Navigation Information Display Replacement

2006 Chevrolet Chevy Express G2500, Van Cargo, 6.6 2SECTION Radio, Video, Audio Disc Player, and Navigation Information Display Replacement
WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Radio, Video, Audio Disc Player, and Navigation Information Display Replacement
GM1967337Courtesy of GENERAL MOTORS CORP.
Callout Component Name
Preliminary Procedure: 
Remove the AM/FM Stereo and Clock and Audio Disc Player Radio Control Assembly. Refer to Radio Control Assembly Replacement (with Navigation Display)  or Radio Control Assembly Replacement (without Navigation Display) .
1 Radio and Video and Audio Disc Player and Navigational Information Display Screw (Qty: 2)
NOTE: Refer to Fastener Notice .

Tighten:  2.5 N.m (22 lb in)
2 Radio and Video and Audio Disc Player and Navigational Information Display Assembly

Procedure

  1. Disconnect the electrical connections.
  2. When replacing the Radio and Video and Audio Disc Player and Navigational Information Display, transfer the navigation opening cover.
  3. Refer to Control Module References for programming and setup information.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.