SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006CHEVY EXPRESS G2500, VAN CARGO, 6.6 2REPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 123 (ENGINE CONTROLS - PID VALUES, PCM CONNECTOR VIEWS AND TERMINAL IDENTIFICATION)SCAN TOOL DATA LIST DEFINITIONS4.3L
2006 Chevrolet Chevy Express G2500, Van Cargo, 6.6 2

Scan Tool Data List Definitions: 4.3L

2006 Chevrolet Chevy Express G2500, Van Cargo, 6.6 2SECTION 4.3L
WARNING: This page is about a different car, the 2003 GMC Sierra, 2003 GMC Cab & Chassis Sierra, 2003 Chevrolet Silverado, and 2003 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

The column labeled Data List indicates where a parameter is located on the scan tool. Review the scan tool operating manual for the exact locations of the data lists. The following is a description of each term listed.

  1. ALL

    The parameter is in all of the data lists indicated below

  2. Eng 1

    Engine Data 1 List

  3. Eng 2

    Engine Data 1 List

  4. EGR

    EGR Data List

  5. FT

    Fuel Trim Data List

  6. MF

    Misfire Data List

  7. EE

    Enhanced EVAP Data List

  8. FF/FR

    Freeze Frame/Failure Records
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.