SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006CHEVY EXPRESS G2500, VAN CARGO, 6.6 2REPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1158 (SECONDARY AND CONFIGURABLE CUSTOMER CONTROLS)COMPONENT LOCATORSECONDARY/CONFIGURABLE CONTROL CONNECTORSSTEERING WHEEL CONTROL SWITCH ASSEMBLY - LEFT (K34/KA9)
2006 Chevrolet Chevy Express G2500, Van Cargo, 6.6 2

Steering Wheel Control Switch Assembly - Left (K34/KA9)

2006 Chevrolet Chevy Express G2500, Van Cargo, 6.6 2SECTION Steering Wheel Control Switch Assembly - Left (K34/KA9)
WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Steering Wheel Control Switch Assembly - Left (K34/KA9) Connector End View
GM1711015Courtesy of GENERAL MOTORS CORP.
Steering Wheel Control Switch Assembly - Left (K34/KA9) Connector Parts Information

Connector Part Information 
  • Pins: 1-4, 6, 8-9
  • OEM: 15405522
  • Service: See Catalog
  • Description: 10-Way F Receptacle 0.64 Series (GY)
  • Terminal/Tray: 1393364-2/7
  • Core/Insulation Crimp: K/K
  • Release Tool/Test Probe: 15315247/J-35616-64B (L-BU)
Steering Wheel Control Switch Assembly - Left (K34/KA9) Connector Terminal Identification

Pin Wire Color Circuit No. Function
1 0.35 PK/BK 1444 12-Volt Reference
2 0.35 PK 5883 Heated Steering Wheel Switch Signal (KA9)
3 0.35 GY 1884 Cruise Control Switch Signal
4 0.35 OG 5884 Heated Steering Wheel Switch LED Control (KA9)
5 - - Not Used
6 0.35 BN 6136 LED Dimming Supply
7 - - Not Used
8 0.35 BK 1050 Ground
9 0.35 D-GN/WH 7158 Cruise Control Indicator Dimming Control
10 - - Not Used
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.