Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Scan Tool Data Definitions
- CTD Status
-
The scan tool displays the current arming status of the content theft system.
- Current CTD Trigger
-
The scan tool displays the current input which has cause a content theft alarm.
- Driver Identification
-
The scan tool displays the driver which has disarmed the content theft system.
- Left Rear Door Ajar Switch
-
The scan tool displays the current status of the left rear door ajar switch.
- Hood Closed Switch
-
The scan tool displays the status of the hood closed portion of the hood ajar switch.
- Hood Open Switch
-
The scan tool displays the status of the hood open portion of the hood ajar switch.
- Rear Closure Ajar Switch
-
The scan tool displays the current status of the rear closure ajar switch.
- Right Rear Door Ajar Switch
-
The scan tool displays the current status of the right rear door ajar switch.
- Theft LED
-
The scan tool displays the current status of the theft indicator as controlled by the content theft deterrent (CTD) system.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.