Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006CHEVY EXPRESS G2500, VAN CARGO, 6.6 2REPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1141 (POWER SEAT SYSTEM)DIAGNOSTIC INFORMATION AND PROCEDURESSCAN TOOL DATA LIST
2006 Chevrolet Chevy Express G2500, Van Cargo, 6.6 2
Scan Tool Data List
2006 Chevrolet Chevy Express G2500, Van Cargo, 6.6 2SECTION Scan Tool Data List
WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Memory Seat Module
| Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
| Operating Conditions: Ignition ON/Engine OFF | |||
| Battery Voltage Signal | Inputs | Volts | Varies |
| Current | Inputs | amps | Varies |
| Driver Seat Front Vertical Sensor | Seat 1 Info | Volts | 0-5 Volts |
| Driver Seat Horizontal Sensor | Seat 1 Info | Volts | 0-5 Volts |
| Driver Seat Rear Vertical Sensor | Seat 1 Info | Volts | 0-5 Volts |
| Driver Seat Recline Sensor | Seat 1 Info | Volts | 0-5 Volts |
| Front Vertical Downward Switch | Seat 1 Inputs | Active/Inactive | Inactive |
| Front Vertical Upward Switch | Seat 1 Inputs | Active/Inactive | Inactive |
| Front Vertical Motor Downward | Seat 1 Outputs | Active/Inactive | Inactive |
| Front Vertical Motor Upward | Seat 1 Outputs | Active/Inactive | Inactive |
| Horizontal Motor Forward | Seat 1 Outputs | Active/Inactive | Inactive |
| Horizontal Motor Rearward | Seat 1 Outputs | Active/Inactive | Inactive |
| Horizontal Forward Switch | Seat 1 Inputs | Active/Inactive | Inactive |
| Horizontal Rearward Switch | Seat 1 Inputs | Active/Inactive | Inactive |
| Lumbar Downward Switch | Seat 1 Inputs | Active/Inactive | Inactive |
| Lumbar Forward Switch | Seat 1 Inputs | Active/Inactive | Inactive |
| Lumbar Horizontal Position | Memory Data 1 | Volts | 0-5 Volts |
| Lumbar Horizontal Position | Memory Data 2 | Volts | 0-5 Volts |
| Lumbar Horizontal Sensor | Seat 1 Info | Volts | 0-5 Volts |
| Lumbar Motor Downward | Seat 1 Outputs | Active/Inactive | Inactive |
| Lumbar Motor Forward | Seat 1 Outputs | Active/Inactive | Inactive |
| Lumbar Motor Rearward | Seat 1 Outputs | Active/Inactive | Inactive |
| Lumbar Motor Upward | Seat 1 Outputs | Active/Inactive | Inactive |
| Lumbar Rearward Switch | Seat 1 Inputs | Active/Inactive | Inactive |
| Lumbar Upward Switch | Seat 1 Inputs | Active/Inactive | Inactive |
| Lumbar Vertical Position | Memory Data 1 | Volts | 0-5 Volts |
| Lumbar Vertical Position | Memory Data 2 | Volts | 0-5 Volts |
| Lumbar Vertical Sensor | Seat 1 Info | Volts | 0-5 Volts |
| Recline Forward Switch | Seat 1 Inputs | Active/Inactive | Inactive |
| Recline Motor Forward | Seat 1 Outputs | Active/Inactive | Inactive |
| Recline Motor Rearward | Seat 1 Outputs | Active/Inactive | Inactive |
| Recline Rearward Switch | Seat 1 Inputs | Active/Inactive | Inactive |
| Rear Vertical Downward Switch | Seat 1 Inputs | Active/Inactive | Inactive |
| Rear Vertical Motor Downward | Seat 1 Outputs | Active/Inactive | Inactive |
| Rear Vertical Motor Upward | Seat 1 Outputs | Active/Inactive | Inactive |
| Rear Vertical Upward Switch | Seat 1 Inputs | Active/Inactive | Inactive |
| Seat Horizontal Position | Memory Data 1 | Volts | 0-5 Volts |
| Seat Horizontal Position | Memory Data 2 | Volts | 0-5 Volts |
| Seat Front Vertical Position | Memory Data 1 | Volts | 0-5 Volts |
| Seat Front Vertical Position | Memory Data 2 | Volts | 0-5 Volts |
| Seat Rear Vertical Position | Memory Data 1 | Volts | 0-5 Volts |
| Seat Rear Vertical Position | Memory Data 2 | Volts | 0-5 Volts |
| Seat Recline Position | Memory Data 1 | Volts | 0-5 Volts |
| Seat Recline Position | Memory Data 2 | Volts | 0-5 Volts |
Door Module(s)
| Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
| Operating conditions: Ignition ON/Engine OFF | |||
| Battery Voltage Signal | Data | Volts | Varies |
| Memory Recall Switch | Inputs | Inactive/Memory 1/Memory 2/Exit | Inactive |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.