SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006CHEVY EXPRESS G2500, VAN CARGO, 6.6 2REPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1141 (POWER SEAT SYSTEM)COMPONENT LOCATORPOWER SEAT CONNECTORSMEMORY SEAT MODULE X6 (AN3)
2006 Chevrolet Chevy Express G2500, Van Cargo, 6.6 2

Memory Seat Module X6 (AN3)

2006 Chevrolet Chevy Express G2500, Van Cargo, 6.6 2SECTION Memory Seat Module X6 (AN3)
WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Memory Seat Module X6 (AN3) Connector End View
GM1664552Courtesy of GENERAL MOTORS CORP.
Memory Seat Module X6 (AN3) Connector Parts Information

Connector Part Information 
  • OEM: 31410-1201
  • Service: See Catalog
  • Description: 20-Way F (GY)
Terminal Part Information 
  • Terminal/Tray: 7116-4618-02/14
  • Core/Insulation Crimp: P/P
  • Release Tool/Test Probe: J-38125-215/J-35616-64B (L-BU)
Memory Seat Module X6 (AN3) Connector Terminal Identification

Pin Wire Color Circuit No. Function
1-4 - - Not Used
5 0.35 WH 1066 Driver Seat Lumbar Up Switch Signal
6 0.35 YE 1065 Driver Seat Lumbar Forward Switch Signal
7 0.35 PU 5286 Adjustable Pedal Switch Forward Signal (JF4)
8-14 - - Not Used
15 0.35 YE/BK 1067 Driver Seat Lumbar Down Switch Signal
16 0.35 D-BU 1064 Driver Seat Lumbar Rearward Switch Signal
17-20 - - Not Used
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.