SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006CHEVY EXPRESS G2500, VAN CARGO, 6.6 2REPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1125 (ANTI-LOCK BRAKE SYSTEM, TRACTION CONTROL SYSTEM & STABILITY CONTROL SYSTEM)COMPONENT LOCATORANTILOCK BRAKE SYSTEM CONNECTORSWHEEL SPEED SENSOR (WSS) - LEFT FRONT (JL4/JF3/JF7)
2006 Chevrolet Chevy Express G2500, Van Cargo, 6.6 2

Wheel Speed Sensor (WSS) - Left Front (JL4/JF3/JF7)

2006 Chevrolet Chevy Express G2500, Van Cargo, 6.6 2SECTION Wheel Speed Sensor (WSS) - Left Front (JL4/JF3/JF7)
WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Wheel Speed Sensor (WSS) - Left Front (JL4/JF3/JF7) Connector End View
GM1710998Courtesy of GENERAL MOTORS CORP.
Wheel Speed Sensor (WSS) - Left Front (JL4/JF3/JF7) Connector Parts Information

Connector Part Information 
  • OEM: 13531640
  • Service: 19149296
  • Description: 2-Way F Clean Body Series, Sealed (BK)
Terminal Part Information 
  • Terminal/Tray: 962885-5/15
  • Core/Insulation Crimp: 6/6
  • Release Tool/Test Probe: 12094429/J-35616-64B (L-BU)
Wheel Speed Sensor (WSS) - Left Front (JL4/JF3/JF7) Connector Terminal Identification

Pin Wire Color Circuit No. Function
1 0.5 L-BU/BK 830 Left Front Wheel Speed Sensor Signal
2 0.5 GY/WH 7064 Wheel Speed Sensor Supply Voltage Left Front
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.