Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006CHEVY EXPRESS G2500, VAN CARGO, 6.6 2REPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1125 (ANTI-LOCK BRAKE SYSTEM, TRACTION CONTROL SYSTEM & STABILITY CONTROL SYSTEM)COMPONENT LOCATORANTILOCK BRAKE SYSTEM CONNECTORSELECTRONIC BRAKE CONTROL MODULE (JH6/JH7)
2006 Chevrolet Chevy Express G2500, Van Cargo, 6.6 2
Electronic Brake Control Module (JH6/JH7)
2006 Chevrolet Chevy Express G2500, Van Cargo, 6.6 2SECTION Electronic Brake Control Module (JH6/JH7)
WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Electronic Brake Control Module (JH6/JH7) Connector Parts Information
Connector Part Information
|
Terminal Part Information
|
Electronic Brake Control Module (JH6/JH7) Connector Terminal Identification
| Pin | Wire Color | Circuit No. | Function |
|---|---|---|---|
| 1 | 3 RD/BK | 442 | Battery Positive Voltage |
| 2 | 0.5 YE/BK | 2500 | High Speed GMLAN Serial Data Bus+ |
| 3 | 0.5 TN/BK | 2500 | High Speed GMLAN Serial Data Bus+ |
| 4 | 0.5 OG | 6030 | Brake Booster Vacuum Sensor Signal (JL1) |
| 5-9 | - | - | Not Used |
| 10 | 0.5 YE/BK | 6032 | Low Reference (JL1) |
| 11 | 5 BK | 2150 | Ground |
| 12 | 0.5 YE | 2501 | High Speed GMLAN Serial Data Bus- |
| 13 | 0.5 TN | 2501 | High Speed GMLAN Serial Data Bus- |
| 14 | 0.5 D-GN/WH | 817 | Vehicle Speed Signal |
| 15 | 0.5 GY/WH | 7064 | Wheel Speed Sensor Supply Voltage Left Front |
| 16 | 0.5 L-BU | 830 | Left Front Wheel Speed Sensor Signal |
| 17 | 0.5 GY | 6031 | 5-Volt Reference (JL1) |
| 18 | 5 RD | 1742 | Battery Positive Voltage |
| 19 | 0.5 L-BU | 5986 | Serial Data Communication Enable |
| 20 | 0.5 YE/BK | 1827 | Vehicle Speed Signal |
| 21-25 | - | - | Not Used |
| 26 | 0.5 GY/WH | 7065 | Wheel Speed Sensor Supply Voltage Right Front |
| 27 | 0.5 D-GN | 872 | Right Front Wheel Speed Sensor Signal |
| 28 | 5 BK | 2150 | Ground |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.