SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006CHEVY EXPRESS G2500, VAN CARGO, 6.6 2REPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1105 (FIXED & MOVEABLE WINDOW SYSTEMS)DIAGNOSTIC INFORMATION AND PROCEDURESSCAN TOOL DATA DEFINITIONS
2006 Chevrolet Chevy Express G2500, Van Cargo, 6.6 2

Scan Tool Data Definitions

2006 Chevrolet Chevy Express G2500, Van Cargo, 6.6 2SECTION Scan Tool Data Definitions
WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.

The Body Control Module (BCM) scan tool data definitions are a brief description of each of the window related parameters displayed within the scan tool data displays for the BCM.

LR Window Down Cmd.

This parameter indicates the commanded state of the left rear window down function.

LR Window Enable Cmd.

This parameter indicates the commanded state of the rear window lockout function.

LR Window Up Cmd.

This parameter indicates the commanded state of the left rear window up function.

RR Window Down Cmd.

This parameter indicates the commanded state of the right rear window down function.

RR Window Enable Cmd.

This parameter indicates the commanded state of the rear window lockout function.

RR Window Up Cmd.

This parameter indicates the commanded state of the right rear window up function.

The Driver Door Switch (DDS) scan tool data definitions are a brief description of each of the window related parameters displayed within the scan tool data displays for the DDS.

Battery Voltage Signal

The scan tool displays 9.0-16.0 volts. This is the state of charge of the vehicle battery.

Driver LF Window Switch

This parameter indicates the current status of the left front window switch.

Driver LR Window Switch

This parameter indicates the current status of the DDS left rear window switch.

Driver RF Window Switch

This parameter indicates the current status of the DDS right front window switch.

Driver RR Window Switch

This parameter indicates the current status of the DDS right rear window switch.

Window Lockout Switch

This parameter indicates the current status of the rear window lockout switch.

Window Lockout Switch Indicator Command

This parameter indicates the commanded state of the rear window lockout indicator.

The Passenger Door Switch (PDS) scan tool data definitions are a brief description of each of the window related parameters displayed within the scan tool data displays for the PDS.

Battery Voltage Signal

The scan tool displays 9.0-16.0 volts. This is the state of charge of the vehicle battery.

Passenger Window Switch

This parameter indicates the current status of the right front window switch.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.