Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006CHEVY EXPRESS G2500, VAN CARGO, 6.6 2REPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1090 (SUNROOF SYSTEM)COMPONENT LOCATORSUNROOF CONNECTORSSUNROOF MODULE
2006 Chevrolet Chevy Express G2500, Van Cargo, 6.6 2
Sunroof Module
2006 Chevrolet Chevy Express G2500, Van Cargo, 6.6 2SECTION Sunroof Module
WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Sunroof Module Connector Parts Information
Connector Part Information
|
Terminal Part Information
|
Sunroof Module Connector Terminal Identification
| Pin | Wire Color | Circuit No. | Function |
|---|---|---|---|
| 1 | 2 BK | 1050 | Ground |
| 2 | - | - | Not Used |
| 3 | 0.35 YE | 43 | Accessory Voltage |
| 4 | 0.35 D-GN | 2074 | Sunroof Switch Express Signal |
| 5 | 0.35 BN | 100 | Sunroof Switch Open Signal |
| 6 | 2 RD/WH | 3140 | Battery Positive Voltage |
| 7 | - | - | Not Used |
| 8 | 0.35 PK | 2075 | Sunroof Switch Close Vent Signal (Crew Cab) |
| 9 | 0.35 OG | 144 | Sunroof Switch Open Vent Signal (Crew Cab) |
| 10 | 0.35 OG | 110 | Sunroof Switch Close Signal |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.