SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006CHEVY EXPRESS G2500, VAN CARGO, 6.6 2REPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1045 (POWER SEAT SYSTEM)COMPONENT LOCATORPOWER SEAT CONNECTORSMEMORY SEAT MODULE C7 (AN3)
2006 Chevrolet Chevy Express G2500, Van Cargo, 6.6 2

Memory Seat Module C7 (AN3)

2006 Chevrolet Chevy Express G2500, Van Cargo, 6.6 2SECTION Memory Seat Module C7 (AN3)
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Memory Seat Module C7 (AN3) Connector End View
GM1664553Courtesy of GENERAL MOTORS CORP.
Memory Seat Module C7 (AN3) Connector Parts Information

Connector Part Information 
  • OEM: 31410-1202
  • Service: See Catalog
  • Description: 20-Way F (BK)
Terminal Part Information 
  • Terminal/Tray: TBD
  • Core/Insulation Crimp: TBD
  • Release Tool/Test Probe: TBD
Memory Seat Module C7 (AN3) Connector Terminal Identification

Pin Wire Color Circuit No. Function
1-4 - - Not Used
5 YE 5285 Adjustable Pedal Switch Rearward Signal (JF4)
6 - - Not Used
7 D-GN 1518 Driver Seat Front Vertical Up Switch Signal
8 YE 1519 Driver Seat Rear Vertical Up Switch Signal
9 TN 1522 Driver Seat Horizontal Forward Switch Signal
10 GY/BK 1269 Driver Seat Recline Forward Switch Signal
11-15 - - Not Used
16 D-GN 5060 Low Speed GMLAN Serial Data
17 D-BU 1520 Driver Seat Front Vertical Down Switch Signal
18 L-BU 1521 Driver Seat Rear Vertical Down Switch Signal
19 L-GN 1523 Driver Seat Horizontal Rearward Switch Signal
20 D-GN/WH 1270 Driver Seat Recline Rearward Switch Signal
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.